DEFECTOMAT weld seam probe with holder

Sensor for the partial eddy current testing of weld seams

Eddy current testing of weld seams. Longitudinally seam-welded tubes can be tested with the simple weld seam probe and accompanying holder. They can be adjusted horizontally up to 200 mm and vertically up to 270 mm and can also be swiveled up from the test position and locked.

The low space requirements facilitate integration in all welding lines as no magnetization is required.

Product highlights

Your advantages at a glance

  • Only one weld seam probe is required for all tube dimensions
  • Low space requirements facilitate integration in all welding lines
  • The water-cooled thermal probe facilitates test temperatures up to + 1,200 °C
  • Magnetization is not required

Technical information

Track width: 10 mm and 5 mm
Clearance from the material surface to be tested: 1 mm – max. 5 mm
Frequency range: 1 kHz – 100 kHz
Material types: ferromagnetic, non-ferromagnetic, and austenitic materials
Height adjustment: by 270 mm

Downloads

Related products

DEFECTOMAT sensor encircling coil

Sensor for the eddy current testing of round or profiled material with encircling coil

DEFECTOARRAY

Segmented Encircling Coil for Highly Sensitive Eddy Current Testing of Tubes and Bars

DEFECTOMAT segment coil

Coils for the partial eddy current testing of weld seams

DEFECTOMAT probes

Probes for non-destructive crack detection using eddy current

Flex probes

Flexible probes for eddy current testing of complex geometries

DEFECTOTHERM coil

Water-cooled thermal coils for hot applications for wires, tubes, and rods

DEFECTOMAT Sensor Systems

Sensor system H

For the eddy current testing of round and profiled non-ferromagnetic material with encircling coils

Sensor system M

For the eddy current testing of round and profiled ferromagnetic material with encircling coils and electrical dc-field magnetization

Sensor system P

For the eddy current testing of slightly ferromagnetic material with through-type coils and permanent magnetization

Sensor system S

Eddy current testing of weld seams

DEFECTOMAT sensor systems for small dimensions

Sensor systems for the eddy current testing of fine wires and tubes

DEFECTOTHERM

Eddy current sensor system with thermal coils for hot applications for wires, tubes, and rods