EMAG

Demagnetization unit for ferromagnetic wires, rods, and tubes

Space-saving solution due to short demagnetization coils. During the testing of defects in ferromagnetic materials using the eddy current or flux leakage method, the test material is generally magnetized until saturated. After the test, the material contains residual magnetization which has to be reduced to the specified values prior to delivery.

FOERSTER provides the high-performance EMAG demagnetization unit for this purpose. thanks to its short coils, it is space-saving and can be integrated in your testing line.

Product highlights

Your advantages at a glance

  • Reliable residual field reduction: Reduces the magnetic residual field strength below specified limit values for approval and supply specifications for semi-finished products
  • Space saving integration: Short demagnetization coils facilitate space saving integration in the testing line
  • Large diameter range:Test material diameter up to 240 mm
  • Increased throughput: Two demagnetization coils installed successively can be operated for increasing material throughput

Technical information

Material diameter: up to 240 mm
Nominal voltage: 230 Vac / 400 Vac

Downloads

Flyer DEFECTOMAT — 3 MB Non-destructive eddy current testing of long products like tubes, bars, wire and profiles

Related products

Color marking system

Precision marking of defects on the test piece

MAG

Magnetization supply for ferromagnetic wires, rods, and tubes

Test defect saw

Precision sawing of artificial test errors for calibration

DEFECTOMAT Sensor Systems

Sensor system H

For the eddy current testing of round and profiled non-ferromagnetic material with encircling coils

Sensor system M

For the eddy current testing of round and profiled ferromagnetic material with encircling coils and electrical dc-field magnetization

Sensor system P

For the eddy current testing of slightly ferromagnetic material with through-type coils and permanent magnetization

Sensor system S

Eddy current testing of weld seams

DEFECTOMAT sensor systems for small dimensions

Sensor systems for the eddy current testing of fine wires and tubes

DEFECTOTHERM

Eddy current sensor system with thermal coils for hot applications for wires, tubes, and rods