MAGNETOMAT
PC-supported magnetometer for measuring magnetic flux density and relative permeability
Precisely measure magnetic fields and permeability. MAGNETOMAT is a 4-channel measurement system for determining magnetic flux density and relative permeability. Using fluxgate probes, it measures static and low-frequency dynamic magnetic fields. A wide range of probes and sensors enables the system to be adapted to different measurement tasks.
Typical applications range from monitoring magnetic environments and checking components for residual magnetic fields to locating ferritic inclusions in stainless steels and non-ferrous materials. Permeability measurements also support quality control of low-permeability materials and can reveal material changes through comparative measurements.
Measurement display, data storage and export are handled via the PC software. Up to four magnetic field probes or permeability probes can be connected. Sensors and sensor electronics are supplied calibrated with a certificate. Stored device and calibration parameters as well as automatic sensor recognition support reliable and convenient operation.
For automated applications, MAGNETOMAT can be used as a benchtop device or installed on a DIN rail inside a control cabinet. USB and Ethernet, a trigger input, and up to six programmable inputs and outputs enable integration into automated measurement and testing systems.
Product highlights
Technical information
| Magnetic field measurement range: | 100 µT / 1 mT, switchable |
| Permeability measurement range: | μr 1.00000–2.00000 |
| Measurement uncertainty, magnetic field: | 1.5% of measured value |
| Measurement uncertainty, permeability: | 5% of measured value |
| Measurement channels: | Up to 4 magnetic field probes or permeability probes |
| Resolution: | 24-bit ADC |
| Data rate: | 2 kHz |
| PC interface: | USB / Ethernet |
| Trigger input: | Incremental encoder, sensors (4–20 mA), digital input |
| I/O interfaces: | Up to 6 programmable inputs and outputs |
| Supply voltage: | 24 V DC |
| Ambient temperature: | 0 to +40 °C |
| Electronics dimensions (L × W × H): | 190 × 172 × 85 mm |
| Electronics weight: | Approx. 1.5 kg |
Accessories
Recalibration of mobile products
Recalibration guarantees the accuracy and quality of your test and measurement values
Probes and Sensors for MAGNETOSCOP & MAGNETOMAT
Flexible Solutions for Magnetic Field and Permeability Measurements
Downloads
Application notes
Pre-Deployment Inspection of Naval EOD Equipment
Magnetic signatures can jeopardize naval EOD missions. MAGNETOMAT reliably detects even the smallest magnetic fields to meet military standards.
Magnetic Field Testing on High-Frequency Connectors for PIM Quality Control
Magnetic contamination can cause PIM and signal degradation. Magnetic field testing reliably identifies critical connectors before installation.
Residual Magnetic Field Testing on Non-Magnetic Drill Collars
Residual magnetism in non-magnetic drill collars can distort borehole measurements and jeopardize drilling. The residual magnetic field test reliably detects such magnetism before use.
Testing of residual magnetic fields in non-magnetic electronic connectors
Processing can leave magnetic contamination on tiny connectors. Differential field measurement with MAGNETOSCOP or MAGNETOMAT detects anomalies with high sensitivity.