Standards

Compliance with international standards forms an important part of professional quality assurance and ensures the high quality of the end product. Units and systems by FOERSTER perform testing in accordance with these international standards to ensure that your materials and components meet the tough requirements.

Below is a selection of standards covered by FOERSTER test systems. Please do not hesitate to contact us should you wish to perform testing in accordance with any standards that are not listed.

Specifies the technical delivery conditions for steel tubes (housing, tubes, mechanical seals, and joint heads), coupling materials, and accessories. The requirements are also defined on three product specification levels (PSL-1, PSL-2, PSL-3).

Products that meet the standard

Comprises specifications for seamless and welded steel tubes for pipelines in the crude oil and natural gas sector. The specifications of API 5L correspond to ISO 3183.

Products that meet the standard

Specifies the technical delivery conditions for steel bore hole tubes with inverted tube ends and welded tool connections for drilling and production companies in the crude oil and natural gas sector.

Products that meet the standard

Describes the testing of oil drilling rigs for the detection of non-magnetic properties. The test method is based on the measurement of the magnetic residual field and relative permeability µr.

Products that meet the standard

Describes the ultrasound test method used for testing carbon and low-alloyed sheet steel and universal profiles and defines a quality classification.

Products that meet the standard

Specifies the ultrasound testing of steel plates with a vertical test head.

Products that meet the standard

Specifies the ultrasound testing of rolled steel plates for special applications with a vertical test head.

Products that meet the standard

Describes the method for testing ferromagnetic tube-shaped products using leakage flux.

Products that meet the standard

Comprise the standard and acceptance standards for ultrasound testing of rolled, fully deoxidized carbon steel plates and alloyed steel plates using the pulse-echo method with a vertical test head.

Products that meet the standard

Comprise the standard and acceptance standards for ultrasound testing of rolled and alloyed steel plates using the pulse-echo method with a vertical test head.

Products that meet the standard

Describes the method for determining the saturation magnetism of sintered hard metals.

Products that meet the standard

Describes the method for determining the coercitivity of sintered hard metals.

Products that meet the standard

Defines the acceptance threshold for discontinuities in sheet steel, strip, and universal plate, based on ultrasound testing.

Products that meet the standard

Describes the technical delivery conditions for hot-rolled steel bars and wire rod. The magnetic leakage flux method with probes is recommended.

Products that meet the standard

Describes the automatic ultrasound wall thickness testing of seamless and welded steel tubes (except submerged arc welded tubes) across the entire tube circumference.

Describes the determination of the Coercitivity in the open magnetic circuit. Method B described above is advantageous as it provides the option to perform measurements regardless of the geometry of the sample. It is not required to manufacture special measuring samples.

Products that meet the standard

Describes the method of the automated leakage flux testing of seamless and welded ferromagnetic steel tubes (except submerged arc welded tubes) across the entire tube circumference for detecting longitudinal and/or transverse imperfections.

Products that meet the standard

Describes the general bases of eddy current testing.

Products that meet the standard

Contains criteria and guidelines for manufacturing, assembling, testing, commissioning, and maintaining tubing systems. A full ultrasound test of plates, strips, and tubes for laminar discontinuities is recommended and its requirements defined.

Products that meet the standard

Describes the ultrasound testing of flat steel products with a thickness of 6 mm or above (reflection method).

Products that meet the standard

Describes the ultrasound testing of sheet steel with a thickness of 6 mm or above (reflection method).

Products that meet the standard

Describes the ultrasound testing method for thick steel plate.

Products that meet the standard

Describes ultrasound testing methods for rolled plate.

Products that meet the standard

Describes the determination of the magnetic saturation dipole moment jS using moment coils in open magnetic circuits. The method described above is advantageous as it provides the option to perform measurements regardless of the geometry of the sample. It is not required to manufacture special measuring samples.

Products that meet the standard

Describes the automatic ultrasound testing of strip and plate used for the production of welded steel tubes for detecting lamination.

Products that meet the standard

Describes the ultrasound testing of flat steel products with a thickness of 6 mm or above.

Products that meet the standard

Specifies the requirements and test methods for steel tubes used for tuning system transport systems in the crude oil and natural gas sector.

Products that meet the standard

Specifies five non-destructive test and defect classification methods, such as the ultrasound testing of raw materials, replacement parts, and weld seams of metallic pressure tanks.

Products that meet the standard

Describes the ultrasound testing of steel plates for pressure tanks.

Products that meet the standard

Describes the ultrasound testing of flat steel products with a thickness of 6 mm or above (reflection method).

Products that meet the standard

Specifies the requirements for hot-molded seamless steel tubes.

Products that meet the standard

Describes the determination of the relative permeability µr in the range from 1.0 to 2.0 using the probe measuring method. The method described above is advantageous as it provides the option to perform measurements of materials and finished components directly on site. It is not required to manufacture special measuring samples.

Products that meet the standard

Describes the determination of the relative permeability µr in the range from 1.0 to 2.0 using the probe measuring method. The method described above is advantageous as it provides the option to perform measurements of materials and finished components directly on site. It is not required to manufacture special measuring samples.

Products that meet the standard

Describes the determination of the relative permeability µr in the range from 1.0 to 2.0 using the probe measuring method. The method described above is advantageous as it provides the option to perform measurements of materials and finished components directly on site. It is not required to manufacture special measuring samples.

Products that meet the standard

Specify the framework for the testing of non-magnetic tools for use in explosive ordnance disposal (EOD). The test method is based on the measurement of the magnetic residual field of the components to be tested using an absolute or gradient magnetometer. 

Products that meet the standard

Describes the ultrasound testing of steel plates for pressure tanks.

Products that meet the standard
This website uses cookies

We use cookies to personalize content and advertisements, to be able to offer functions for social media and to analyze access to our website. We also share information about your use of our website with our social media, advertising and analytics partners. Our partners may combine this information with other data that you have provided to them or that they have collected as part of your use of the services.

Our cookies have changed, so you will need to give your consent again.

Your previous consent to our cookies has expired, so you will need to consent again.

Notwendige Cookies helfen dabei, die Webseite für den Benutzer nutzbar zu machen. Sie speichern grundlegende Informationen, wie eine Anmeldung an der Webseite oder die Zustimmung zu den einzelnen Cookies.

Name Provider Purpose Duration Type
YSC YouTube

YouTube Video

Sitzung Cookie
CONSENT YouTube

YouTube Video

2 Jahre Cookie
VISITOR_INFO1_LIVE YouTube

YouTube Video

6 Monate Cookie
__hs_opt_out HubSpot notwendig

Wird von HubSpot verwendet, um sicherzustellen, dass ein Benutzer nach einem Opt-out nicht erneut nach seiner Zustimmung zu fragen.

13 Monate Cookie
__hs_do_not_track HubSpot notwendig

Wird von HubSpot verwendet, um das Tracking eines Benutzers zu deaktivieren.

13 Monate Cookie
__hs_initial_opt_in HubSpot notwendig

Wird von HubSpot verwendet, um die Zustimmung zum Tracking zu speichern.

7 Tage Cookie
hs_ab_test HubSpot notwendig

Wird von HubSpot verwendet, um einen Benutzer bei A/B-Tests immer derselben Gruppe zuzuordnen.

Session Cookie
*_key HubSpot notwendig

Wird von HubSpot verwendet, um zu verhindern, dass ein Benutzer sich mehrfach für dieselben Inhalte anmelden muss.

14 Tage Cookie
hs-messages-is-open HubSpot notwendig

Wird von HubSpot verwendet, um Einstellungen zum Chat-Widget zu speichern.

30 Minuten Cookie
hs-messages-hide-welcome-message HubSpot notwendig

Wird von HubSpot verwendet, um sicherzustellen, dass die Willkomensmeldung des Chats zur ein mal pro Tag angezeigt wird.

1 Tag Cookie
__hsmem HubSpot notwendig

Wird von HubSpot verwendet, um den Anmeldevorgang eines Benutzers zu speichern.

1 Jahr Cookie
hs-membership-csrf HubSpot notwendig

Wird von HubSpot verwendet, um zu verhindern, dass ein Anmeldevorgang verfälscht wird.

Session Cookie
hs_langswitcher_choice HubSpot notwendig

Wird von HubSpot verwendet, um die vom Benutzer ausgewählte Sprache zu speichern.

2 Jahre Cookie
__cfduid HubSpot notwendig

Wird von HubSpot verwendet, um Daten via CDN / Cloudfare sicher zu übertragen.

Session / 30 Tage Cookie
__cfruid HubSpot notwendig

Wird von HubSpot verwendet, um Daten via CDN / Cloudfare sicher zu übertragen.

Session Cookie
gits_cookie_accepted_* digiwerk GmbH

Speichert die Auswahl des Cookiebanners.

unbegrenzt LocalStorage
fe_typo_user TYPO3

Wird vom CMS-System TYPO3 benötigt, um Benutzer am Frontend anmelden zu können.

1 Jahr Cookie
DataTables_* TYPO3

Wird vom CMS-System TYPO3 vebSpeichert Einstellungen des Benutzers für die Anzeige von Daten im Backend.

unbegrenzt LocalStorage
t3-tabs-* TYPO3

Speichert Einstellungen des Benutzers für die Anzeige von Daten im Backend.

unbegrenzt LocalStorage
be_typo_user TYPO3

Wird vom CMS-System TYPO3 benötigt, um Benutzer am Backend anmelden zu können.

1 Jahr LocalStorage
PHPSESSID TYPO3

Wird vom CMS-System TYPO3 benötigt, um Benutzer am Backend anmelden zu können.

1 Jahr Cookie

Marketing-Cookies helfen dabei, Besucher auf Webseiten wiederzukennen. Dadurch wird u.A. ermöglicht, ihnen genauere Werbeanzeigen und Suchergebnisse zu zeigen.

Name Provider Purpose Duration Type
__hstc HubSpot

Wird von HubSpot verwendet, um eine eindeutige ID zu registrieren, die statistische Daten des Benutzers zuordnen zu können.

13 Monate Cookie
hubspotutk HubSpot

Wird von HubSpot verwendet, um eine eindeutige ID zu registrieren, die statistische Daten des Benutzers zuordnen zu können.

13 Monate Cookie
__hssc HubSpot

Wird von HubSpot verwendet, um die Session eines Benutzers zu erkennen.

30 Minuten Cookie
__hssrc HubSpot

Wird von HubSpot verwendet, um die Session eines Benutzers zu erkennen.

Session Cookie

Statistik-Cookies helfen dabei, zu verstehen, wie Besucher mit der Webseite interagieren, indem Informationen anonym gesammelt und gemeldet werden.

Name Provider Purpose Duration Type
_pk_id.*.* Matomo

Wird von Matomo verwendet, um verwendet, um einige Details über den Benutzer zu speichern, wie z.B. die eindeutige Besucher-ID.

13 Monate Cookie
_pk_ses.*.* Matomo

Wird von Matomo verwendet, für kurzlebige Cookies, die zur vorübergehenden Speicherung von Daten für den Besuch verwendet werden.

30 Minuten Cookie
_pk_testcookie..undefined Matomo

Wird von Matomo verwendet, um zu prüfen, ob Ihr Browser Cookies unterstützt.

Session Cookie

Cookies are small text files that are used by websites to make the user experience more efficient.According to the law, we can store cookies on your device if they are absolutely necessary for the operation of this site. We need your permission for all other types of cookies.This site uses different types of cookies. Some cookies are placed by third parties that appear on our pages.