FEREX Borehole detection
Borehole detection system for deeply buried ferromagnetic objects
Reliable detection even at greater depths. FEREX borehole detection enables the detection of deeply buried ferromagnetic objects when surface surveys are insufficient or affected by buildings, landfill or ferromagnetic clutter close to the surface. The FEREX MG-10-550 probe is lowered into the borehole using a special probe cable. Waterproof probe cables enable surveys at depths of up to 100 m.
If water is present in the borehole, a ballast weight can be attached to the lower end of the probe to compensate for buoyancy and ensure controlled operation. Borehole detection can be performed by one person.
In combination with the FEREX 4.034, measurement values can be displayed directly and borehole data can be recorded and stored. DATA2LINE BM software is available for subsequent data evaluation. An optional mechanical depth measuring device with integrated odometer enables precise assignment of measurement data to the corresponding survey depth.
Product highlights
Technical information
| Probe: | FEREX MG-10-550 probe |
| Protection grade: | IP68, up to 100 m |
| Probe cable lengths: | 15 m / 30 m, further lengths upon request |
| Data acquisition: | FEREX 4.034 |
| Data evaluation: | DATA2LINE BM software |
| Probe cable kit: |
|
| Depth measurement: | Mechanical depth measuring device with integrated odometer, optional |
Accessories
Downloads
Related products
Accessories
FEREX probe holder
Modular probe holder system for large-area magnetometer surveys
Detection
FEREX PNC
Modular magnetometer network for large-area surveys on land and underwater
Detection
FEREX 4.034
Digital fluxgate magnetometer for detection of ferromagnetic metals with data logging and comprehensive application software
Detection
FEREX 4.035
Inspection & Analysis Software
DATAMONITOR 4
Inspection & Analysis Software
DATA2LINE Product Family
Evaluation and project management software for geophysical measurement data