MAGNATEST - Magneto Testing - non destructive magneto-inductive testing instruments
The magneto-inductive principle has proven itself many thousands of time in industrial mass production as well as in the laboratory for the non-destructive testing of components and semi-finished products for material properties. The testing instruments of the MAGNATEST family from FOERSTER offer you use the entire range from
low-cost instruments for the simple Yes/No sorting through to high end instruments with multidimensional regression analysis.
Common to all of them are their high quality test results and the possibility to examine specific magnetic characteristics of the material through the analysis of the harmonic wave spectrum.
|
|
|
MAGNATEST ECM 3.621
The module for economical entry into magneto-inductive testing. Simplest of control elements, uni-dimensional signal display, Yes/No sorting. Problem-free integration in existing control cabinets, galvanically decoupled interface to the test line controller (PLC). Switchable test frequency, higher harmonic wave evaluation. Improvement of the operating convenience, evaluation possibilities and presentation of the results through PC connection with the use of the eddyWin software.
|
|
|
|
MAGNATEST S 3.625
The reference instrument in the field of magneto- inductive testing. Unequal- led with respect to test sensitivity and evaluation possibilities. Multi-frequency excitation combined with harmonic wave evaluation and multi-parameter analysis to suppress interference. Multidimensional linear regression for the calculation of continuous key variables, such as surface hardness, case hardening depth, etc.
|
|
|
|
MAGNATEST D 3.623
The newest member of the MAGNATEST family. Fully digital test electronics from the signal excitation through to evaluation. Compact, attractive and economical, this new device joins the existing FOERSTER product range for non-destructive magneto-inductiv testing. Like the others in the series, the MAGNATEST D offers the possibility to perform uni-frequency as well as sequential multi-frequency testing. Furthermore - and this is new - it also masters simultaneous multi-frequency testing (impulse technique), so that both the quality of the test results and the throughput are raised substantially at the same time.
|
|
 |
MAGNATEST Coils and Scanning Sensors
The measurement transducers (test coils and scanning sensors) are just as important as the use of a high performance test instrument.
A measurement transducer adapted optimally to the purpose of the test and the test object is a necessity for the successful solution of every testing problem. The outstanding know-how of FOERSTER in the field of eddy current testing is also attributed to its experience and knowledge in the field of sensor construction.
A wide range of standard transducers (coils and scanning sensors) as well as the possibility to manufacture special transducers makes it possible for us to react flexibly to the widest range of problems.
|
|
|
|
|
